Manualshelf

Operating instructions

ManualsBrandsMeyer Manualsaudio & home theatreUPM-1XP
21222324252627282930
CHAPTER 4: MOUNTING ULTRA XP LOUDSPEAKERS
22
ARRAY ADAPTERS FOR UPJ-1XP AND
UPJUNIOR-XP
Array adapter plates are available for the UPJ-1XP
(MAAM-UPJ) and UPJunior-XP (MAAM-UPJunior) to form
horizontal and vertical arrays of up to three loudspeakers.
The front adjustment slot is used to adjust the distance
between the loudspeakers to achieve the desired splay
angle (from 20 to 80 degrees) and coverage. The array
adapter kits include two array adapter plates, eight M8
screws and washers, and four M8 knobs (for floor monitor
use only). A single kit can array two UPJ-1XPs or two
UPJunior-XPs; two kits are required for an array of three
loudspeakers.
CAUTION: The MAAM-UPJ array adapter sup-
ports a maximum of three UPJ-1XP loudspeak-
ers in an array.
CAUTION: The MAAM-UPJunior array adapter
supports a maximum of three UPJunior-XP
loudspeakers in an array.
Arrays are assembled by attaching the array adapter plates
to the top and bottom end plates of the loudspeakers and
securing them with the included M8 screws and washers.
MAAM-UPJ Array Adapter Plate (for UPJ-1XP Loudspeakers)
MAAM-UPJunior Array Adapter Plate (for UPJunior-XP Loudspeakers)
MAAM-UPJ with UPJ-1XPs, Exploded View