Operating instructions

APPENDIX E: ULTRA XP LOUDSPEAKER SPECIFICATIONS
40
UPJ-1XP UPJunior-XP UPM-1XP UPM-2XP UMS-1XP
Nominal Input
Sensitivity
0.0 dBV (1.0 V rms)
continuous is typically
the onset of limiting
for noise and music
0.0 dBV (1.0 V rms)
continuous is typically
the onset of limiting
for noise and music
–8.0 dBV (0.4 V rms)
continuous is typically
the onset of limiting
for noise and music
–8.0 dBV (0.4 V rms)
continuous is typically
the onset of limiting
for noise and music
–4.0 dBV (0.6 V rms)
continuous is typically
the onset of limiting
for noise and music
Input Level Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 to produce the maximum peak
SPL over the operating bandwidth of the loudspeaker
AMPLIFIER UPJ-1XP UPJunior-XP UPM-1XP UPM-2XP UMS-1XP
Amplifier Type 2-channel (class D) 2-channel (class D) 3-channel (class D) 3-channel (class D) 2-channel (class D)
Output Power 300 W total 300 W total 350 W total 350 W total 450 W total
Note: Wattage rating based on the maximum unclipped burst sine-wave rms voltage the amplifier will produce into the
nominal load impedance.
THD, IM TIM <.02% <.02% <.02% <.02% <.02%
Load Capacity 4  low channel,
16  high channel
4  low channel,
12  high channel
8  low channel,
8  high channel
8  low channel,
8  high channel
4  both channels
Cooling Convection Convection Convection Convection Convection
DC POWER UPJ-1XP UPJunior-XP UPM-1XP UPM-2XP UMS-1XP
Voltage Requirement 48 V DC 48 V DC 48 V DC 48 V DC 48 V DC
Note: Meyer Sound power supply required. For information and specifications on the MPS-488HP IntelligentDC external
power supply, refer to its datasheet.
PHYSICAL UPJ-1XP UPJunior-XP UPM-1XP UPM-2XP UMS-1XP
Enclosure Premium birch
plywood
Premium birch
plywood
Premium birch
plywood
Premium birch
plywood
Premium birch
plywood
Finish Black textured Black textured Black textured Black textured Black textured
Protective Grille Powder-coated, hex-
stamped steel with
black mesh screen
Powder-coated, hex-
stamped steel with
black mesh screen
Powder-coated, hex-
stamped steel with
black mesh screen
Powder-coated, hex-
stamped steel with
black mesh screen
Powder-coated, hex-
stamped steel with
black mesh screen
Mounting Aluminum end plates
with M8 threaded
attachment points for
mounting and flying
with QuickFly and
standard rigging
options
Aluminum end plates
with M8 threaded
attachment points for
mounting and flying
with QuickFly and
standard rigging
options
Three 3/8”-16 or met-
ric M10 nut plates
Three 3/8”-16 or met-
ric M10 nut plates
1 3/8” (35 mm) pole-
mount receptacle on
cabinet top; cabinet
optionally available
with side attachment
points for USM-SM
U-bracket
Dimensions 11.15” w (283 mm)
22.43” h (570 mm)
12.25” d (311 mm)
9.00” w (229 mm)
19.04” h (484 mm)
10.20” d (259 mm)
6.85” w (174 mm)
18.00” h (457 mm)
7.70” d (196 mm)
6.85” w (174 mm)
18.00” h (457 mm)
7.70” d (196 mm)
22.75” w (578 mm)
16.30” h (414 mm)
17.51” d (445 mm)
Weight 43 lbs (19.5 kg) 26 lbs (11.8 kg) 17 lbs (7.7 kg) 17 lbs (7.7 kg) 58 lbs (26.3 kg)
ENVIRONMENTAL UPJ-1XP UPJunior-XP UPM-1XP UPM-2XP UMS-1XP
Operating
Temperature
0° C to +45° C
Non Operating
Temperature
–40° C to +75° C
Humidity To 95% at 45° C (non-condensing)
Ultra XP Loudspeaker Specifications