Operator`s manual

Rev. 11/07/2006
It is unlawful to modify, copy, distribute, transmit, display, perform, reproduce, publish, license, create derivative works from, transfer or sell any
information obtained from these documents. Copyright and trademark infringement is a violation of federal and state law subject to criminal and civil penalties.
© 2007 E.B. Meyer, Inc
Testing Connections for Leaks - Continued
Do not use any petroleum products on or near the equipment, regulators, hoses,
including oils, solvents and cleaners.
Do not use any cleaners or solvents that are not “oxygen safe”.
Make sure that hands and tools are free of oil and grease.
Oxygen vigorously accelerates combustion and may form explosive compounds
when exposed to combustible materials or oil, grease, and other hydrocarbon
materials.
Improperly cleaned equipment and piping could result in a combustion reaction
causing damage to equipment and injury to personnel.
When performing leak tests, using an “oxygen safe” testing solution is essential to
preventing contamination of your oxygen source.
If you are unsure of the product you are using for leak testing, consult a welding or
oxygen supply dealer for recommended products that are “oxygen safe” and free of
oils and hydrocarbons.
///
///
The remainder of this page has been intentionally left blank
12
DANGER