Specifications

2
1
18
Removing the leg supports
For easy transfer into and out of the
wheelchair as well as a reduced wheel-
chair length (important for transport)
the leg support can be removed (1).
☞ Note:
Before swivelling the leg support
loosen or remove the calf belt on
one side.
– Remove both feet from the foot-
plates.
– Pull or press the locking lever back-
ward (2).
– Swivel the leg support sideways
and take them off toward the top
(1).
Attaching the leg supports
With the leg support in a swivelled-
aside position, hang it in and then
swivel it to the front until the locking
device audibly latches.
☞ Note:
After swivelling the leg support in-
ward again do not forget to check
the corresponding locking device.
Afterwards replace the calf strap.