Specifications

4
2
1
3
6
5
26
Inserting the arm support
To attach the arm support insert the
bolt currently in the slanted posi-
tion (1) into the respective recep-
tacle (2).
☞ When swivelling down the arm
support, take care that the bracket
(3) grips around the back tube.
– Swivel the arm support forward
into the corresponding receptacle
until the locking button (4) audibly
engages.
☞ Note:
The swivelling forward automati-
cally engages the rear locking de-
vice of the arm support.
Height adjustment of the arm
supports
– For height adjustment of the arm
support secure the support pad
with one hand to prevent it from
falling down.
– Then activate the release button
from the inside (5) with the other
hand.
– Now slide the arm support into the
desired position, release the spring
button (5) and let it snap into place
by sliding the arm support into the
next possible position (6).