Specifications
5
1
2
3
4
4
32
Height adjustable back sup-
port
The height adjustable back support
(1) is continuously adjustable in height
(2).
Adjusting the back support
height
– Therefor remove the back cushion
(3). – Velcro fastener.
☞ Observe chapter < Adjustable back
support >.
– Then loosen the clamping screws
(4) on both sides and adjust the
back tubes parallel according to
the cm scale at the side to the same
height (5).
– Then retighten the attachment
screws (4) on both sides.
☞ The telescopic tubes are secured
by a spring wire within the tube
to prevent them from being pulled
out completely.
☞ If the spring wire is defective the
telescopic tubes can be adjusted to
max. 15 cm according to the scale
(5).
☞ Defective spring wires can be re-
placed in the specialist workshop.