Specifications

69
Tools
The following tools are required for adjustments and maintenance:
Open-end or ring spanner .............................. Wrench width (WW) 8 / 10 / 13 mm
Hexagonal stud wrench ............................................Wrench width 3 / 4 / 5 / 6 mm
Phillips screwdriver .............................................................. Size PH resp. PZ 0 / 1 / 2
Slot screw drivers ........................................................................................ Size small
Tightening torque for screwed connections
If not noted otherwise the screwed connections are to be tightened with the
corresponding torque.
Thread diameter M 4 ..........................................................................................3 Nm
Thread diameter M 5 ..........................................................................................5 Nm
Thread diameter M 6 ........................................................................................10 Nm
Thread diameter M 8 ........................................................................................25 Nm
Thread diameter M 10 .....................................................................................50 Nm
Thread diameter M 12 .....................................................................................85 Nm