Operation Manual
2
2
1
3
15
Emergency lock down of the mag-
netic brake
The magnetic brake on the motor is
automatically activated when battery
voltage is lost.
☞ The SCOOTER is thus secured com-
pletely against rolling away.
Disconnecting the emergency lock
In order to disconnect the emergency
lock for pushing the SCOOTER the
activated magnetic brake can be re-
leased at the motor [1].
1. Before disconnecting the emer-
gency lock switch the SCOOTER
off.
☞ Therefore observe chapter
< Driving key >.
2. In order to push the SCOOTER first
press the lever of the magnetic
brake (2) down as far as possible
then push it towards the back [1].
Re-establishing the emergency
lock
– In order to establish magnetic
brake, first press the lever of the
magnetic brake (2) forward as far
as possible and then let it engage
towards the top [3].
If required establish drive mode.
☞ Therefore observe chapter < Es-
tablishing drive mode >.
!
Attention:
Do not activate the lever of the
magnetic brake (2) while driving!