Operation Manual
1
2
4
3
33
Mounting the batteries
Mounting is done in reverse order.
1. Set the batteries into the frame
and secure them with the span-
ning straps (1).
!
Attention:
Make sure that the cables are cor-
rectly routed when mounting the
batteries.
– Danger of cable damage.
2. Reconnect the battery cable (2) on
both sides.
☞ Insert the plugs as far as possi-
ble.
– Conduct a slight pulling test
on the plug.
3. Replace the battery lid (3).
☞ If necessary screw the ball grip
off of the selection lever first.
3. Screw the ball grip back onto the
selection lever (4).
5. Replace the seat.
☞ Let the seat locking device snap
into place and check for secure
fit.