Specifications

CD-3706/P Operator’s Guide
Document Revision: 030501.1
5500 Series Operator’s Guide
Document Revision:05/07/07
Page 13
• This displays the Verify After status of the 5500. The Verify After
function will verify a copied disc against the master disc
immediately after it has been copied.
• This displays the Multiple Images status of the 5500. Multiple
images allows the user to store up to 6 separate master images on the
internal Hard Drive.
• This displays the Installed Memory of the 5500.
• This displays the number of good and bad copies that were produced
to date on the system
• Click the “2” key with your mouse. You will see several functions
scroll across the screen. Select a function by clicking the
corresponding number with your mouse. Enable or disable the
function by clicking the “Start/Yes” or “Stop/No” key.
• 0- The factory setting for this function is disabled. When enabled,
the Verify After feature automatically compares discs to the master
disc or hard disk image after copying is completed. Due to the nature
of the various compact disc formats, only CD-ROM Mode 1, CD-
ROM Mode 2, CD-ROM XA Mode 2 Form 1, and audio (CD-DA)
discs can be compared.
• 1- The factory setting for this function is disabled. When enabled,
the Multiple Images feature allows up to six images to be stored on
the hard disk drive at one time. This setting will remain in effect
until disabled, even after restarting the 5500.