Specifications

CD-3706/P Operator’s Guide
Document Revision: 030501.1
5500 Series Operator’s Guide
Document Revision:05/07/07
Page 23
• Upon successful completion, the copied disc(s) will be ejected. The
screen will now read:
• Click the “START/YES” key, and you will be returned to the main
operating screen:
Note: If discs failed to COPY properly, the recorder tray drawer
will stay closed, and the screen will read” Copy Failed, Click
Start”. This copy should not be used.
Multiple Images Enabled
To make copies from hard disk images that were previously created with
the Multiple Images feature “enabled”, the steps are as follows:
• From the main operating screen depicted below:
• Load as many blank discs as are required into the recorders. Click the
“COPY” key with your mouse. The screen will now read:
• Click the “START/YES” key. The screen will now read:
The 5500 Series defaults to the first image (1). For the purposes of this
example, click the “1” key to select this image, followed by the
“START/YES” key. The screen will now read:
Progress will be displayed on the screen during the operation: