Manual
CD-5916 Operator’s Guide
Document Revision: 060102
Page 41
• Set Archive as desired by pressing the “START/YES” or “STOP/NO”
key (see page 19). This setting will remain in effect until disabled even
after restarting the CD-5916. The screen will now read:
M
U
L
T
I P
L
E
I M
A
G
E
S
P
R
E
S
S
Y
E
S
/ N
O
• Set Multiple Images as desired by pressing the “START/YES” or
“STOP/NO” key (see page 18). This setting will remain in effect until
“disabled”, even after restarting the CD-5916. The screen will now read:
R
E
C
O
R
D
R
I D
O
P
T
I O
N
P
R
E
S
S
Y
E
S
/ N
O
• Press the “START/YES” key to “enable” the Record RID feature. The
screen will now read:
C
O
P
Y
P
R
O
T
E
C
T
O
P
T
I O
N
P
R
E
S
S
Y
E
S
/ N
O
• Set Copy Protect as desired by pressing the “START/YES” or
“STOP/NO” key (see page 20). You will be returned to the main
operating screen:
1
6
X
C
O
P
Y
O
R
C
O
M
P
A
R
E
• Copy the discs in the usual way and the SmartRID or SmartSTAMP
code will now be written into them.
Reading SmartRID And SmartSTAMP Codes
To read a SmartRID or SmartSTAMP code from a copied disc, the steps
are as follows:
• From the main operating screen depicted below:
1
6
X
C
O
P
Y
O
R
C
O
M
P
A
R
E
• Load the disc that you wish to read the SmartRID or SmartSTAMP
information from, into the top right-hand side CD-R/RW recorder.
• Press the “7” key. The screen will now read:
E
N
T
E
R
A
U
T
H
O
R
I N
G
M
O
D
E
?
• Press the “STOP/NO” key. The screen will now read: