Manual
CD-5916 Operator’s Guide
Document Revision: 060102
Page 57
Firmware Updates
From time to time the CD-5916’s internal software or “firmware” may need
updating to add new features or improve existing functions. Firmware is
easily updated by loading a “Firmware Update CD” into the system. The
latest version of firmware will be available for downloading to your
computer from the MediaFORM web site: www.mediaform.com.
Once a firmware image file is downloaded a “Firmware Update CD” can
then be written using a computer, a CD-R/RW recorder and most popular
premastering programs (such as Adaptec Easy CD Creator and Toast,
CeQuadrat WinOnCD, Ahead Nero, NTI CD-Maker, and others). Refer to
your premastering software documentation for details on how to record a
disc from an image file.
After having created a “Firmware Update CD” perform the following steps
to update the CD-5916’s firmware:
• From the main operating screen depicted below:
1
6
X
C
O
P
Y
O
R
C
O
M
P
A
R
E
• Load the “Firmware Update CD” into the top right-hand side CD-R/RW
recorder.
• Turn off the power to the CD-5916.
• Press and hold down the “9” key and turn on the power to the CD-5916.
Continue to hold down the “9” key until the screen reads:
L
O
A
D
I N
F
I R
M
W
A
R
E
. . . .
• Release the “9” key. Please be patient as this will take a few moments.
During the update process the screen will read:
F
I R
M
W
A
R
E
U
P
D
A
T
E
. . .
Upon successful completion the display will read:
U
P
D
A
T
E
D
O
N
E
, R
E
S
T
A
R
T
I N
G