Manual

DIRECTOR EC Series Operator’s Guide
Document Revision: 080904
Page 10
Location Of CD-R/RW and DVD ±R/±RW Recorder Parts And Controls
ProDRIVE 52x
Legend
1. Disc tray - Discs are loaded and removed from this tray. Pressing the eject button will open the tray when the
power is switched on to the Director EC.
2. Emergency eject pinhole - In the event that the disc tray will not open by pressing the eject button, insert the
tip of a large paper clip into this hole and push.
3. Earphone jack
4. Volume Control
5. Read and write status LEDs - These indicators light up when the recorder is reading or writing.
6. Eject button - This button is used to open or close the disc tray.
Pioneer DVD-R±/±RW
Legend
1) Disc Tray - Discs are loaded and removed from this tray. Pressing the eject button will open the tray when
the power to the Director EC is switched on.
2) Headphone Jack – Connect headphones here.
3) Volume Control Knob – This controls the volume level of the headphones.
4) Disc Indicator – Light indicates presence of disc in drive.
5) Ventilation Hole – Do not block.
6) Ventilation Hole – Do not block.
7) Eject Button – This button is used to manually open the disc tray.
8) Emergency Eject Pinhole – In the event that the disc tray will not open by pressing the eject button, insert
the tip of a large paper clip into this hole.