Installation manual

Rev. 112205.1
Page 11
Installing the Baxter Software
Baxter’s main application is the Scribe PC duplication software. In addition to being the
software used for copying and creating discs from files, it also serves as the launch pad
for the included premium utilities; Riptastic, and Backup Platinum. See appendix A for a
description of these application and their installation.
If you are upgrading or reinstalling the software, it is recommended you remove the old
version first.
Note: Always install the Scribe PC software prior to the
premium utilities.
To install the Baxter software:
• Insert the Baxter software CD into one of the drives on the host PC
• Click on Start/Run.
• In the “Open” text box, type “D:\Scribe_EC_setup.exe” (D=Disc Drive)
where “D” represents the letter of the drive you have placed the disc in.
• Then, click on OK and the installer screen will appear: