Installation manual

Rev. 112205.1
Page 35
To change an ISRC code:
• Right click the desired audio track in the lower left pane, and select
Edit. The screen will now read:
• Enter the code in the ISRC line and click the OK button. Valid codes
start with two-letter country code, followed by ten digits.
To change a Copy Prohibit flag:
• Right click the desired audio track in the lower left pane, and select Edit
The screen will now read:
• To enable Copy Prohibit bit select the Copy Prohibit box so that it is
checked, or uncheck the box to disable Copy Prohibit bit.