Installation manual

Rev. 112205.1
Page 41
The Production Process
During production, the blank discs will be loaded one at a time from the input bin
into the recorder. Upon successful completion the discs will be unloaded onto the
output. This process will continue until the job is complete and the Baxter will
then advance to the next job in the queue according to its priority.
However, if the input bin, sometimes referred to as a hopper, empties before the
job is complete the screen will read:
To continue running the job, place additional blank discs onto the input bin and
click the Retry button. To stop the job, click the Cancel button and the remainder
of the job will be aborted. The Baxter will then advance to the next job in the
queue according to its priority.
Note: Any rejected discs have failed to record properly and
should not be used.
Creating a job
In order to produce copies you must create a job. Think of a job as your work-
order. It tells the Baxter what to do, and how many to do.
• Click the New button to the right of the Queued jobs area.
Clicking on New in the Queued jobs area of the Job Manager tab brings
up the Creating new job ‘New Job’ wizard. The Creating new job ‘New
Job’ wizard includes a series of four check boxes: Archive only, Copy
and/or Verify, Relay-mode job, and Multi-disc archive. Also included
in the wizard is the image path fields, quantity, priority, speed, and
media type. The first step in creating a job is to set the general options
so as to define which operations the Baxter will perform when the job is
submitted for production.