Installation manual

Rev. 112205.1
Page 42
• Check the option box to enable the production option needed for your
job and click “Next”:
Operations and Options:
Copy When checked the discs in the submitted job will
be recorded using the disc image file selected in the
IMAGE field.
Verify When checked the discs in the submitted job will
automatically be compared against the source files
after recording is completed.
Test When checked the discs in the submitted job will
not be recorded.
Archive
(Read-in)
When checked, an existing disc is saved to the hard
drive as a physical image file for later recording.
Relay Mode When checked an image of the top most disc
(master disc) is created on the hard drive and used
to make copies.
Multi-disc archive
(Batch read-in)
This is the same as ARCHIVE, but allows you to
batch read in several discs in succession
Speed The recording speed pull-down allows you to set
the recording speed as determined by the
capabilities of the recorder installed in the Baxter.