Installation manual

Rev. 112205.1
Page 45
Copy and / or Verify
This allows you to start copying or verifying from an image file, or a new master
disc.
1. On the Job Manager TAB click new and
select the “Copy and/or Verify” button as
seen in (fig. 1).
2. Click “Next”.
3. Select the Image source for your job.
This can be an ISC, IMG, or UDF or a
master disc that you place on top of the
blank discs. The Scribe software will
archive (read-in) the contents of the
master and copy the contents to as many
discs as are indicated in the quantity box.
If the Scribe software detects another
master during the copy process, the
Scribe software will reject the additional
master. You may also select browse and
choose an existing disc image.
4. You will then want to choose the
Operations and Options for your job:
Copy, Test, Writing speed, and Verify,
You will then enter the quantity of discs
toward the bottom of the screen.
5. If you choose “Existing CD Image” the
file will show in the window, as seen in
(fig. 3).
6. Click “Next”.
(fig. 1)
(fig. 2)
(fig. 3)