Installation manual

Rev. 112205.1
Page 50
• Again using Windows Explorer. browse to the location where you would like to
place the client software, right click and select PASTE. I suggest copying to your
remote’s PC’s desktop, or to a network a share from which you can copy
ScribeCLient.exe file to each client PC’s desktop.
Using the client software
The Scribe network client, is virtually identical to the Baxter software itself. It allows
you to remotely do almost most everything you can on the Baxter copier itself. This
does NOT include the premium utilities as detailed in Appendix C which must be run
locally on the Baxter’s host PC.
Before running the Scribeclient.exe client application, be sure the Baxter copier is
powered on and available on the network. The client software will NOT work unless
the Baxter is running as it functions as job server.
• If you copied the client software to your
desktop, click on the Scribeclient.exe
icon:
• You will be prompted for a User Id (fig.)
• Enter a unique name in the User ID. User
IDs are for the sole purpose of
distinguishing one user from another
when shared amongst multiple users. It
does not serve the purpose of granting or
not granting access to the device.
• Click on Connect. Select Hosts will be
displayed (fig. 2)
• Left click on the appropriate Baxter. This
list displays computers by their network
name. Then click OK.
• The familiar Baxter application will open
up. Its use is the same as the Baxter, so
please refer to previous pages on how to
use the software.
(fig 1.)
(Fig.2)