Installation guide

333
Page 3
Scribe EC Quick Installation Guide
with Prism PLUS Printer
Document Revision: 2004/12/07
ScribeEC with OptiEC PRO printer
Installation Guide
Document Revision: 2005/05/20
SCRIBE EC with OptiEC PRO PRINTER INSTALLATION GUIDE
Minimum System Requirements
Print Station & 1-Drive Models – Minimum System Requirements:
• Minimum Pentium® III or compatible personal computer @ 800 MHz or faster.
• Windows 2000 Professional (Service Pack 4 or higher) or Windows XP Professional
(Service Pack 1.0a or higher) with Administrative rights.
• 512MB RAM
• 7200 RPM ATA-100 hard drive with 850 MB for CD-R or 5GB (NTFS) for DVD-R
of free hard disk space - fully defragmented.
• Monitor: 800 x 600 display, 16-bit color recommended.
• Two button mouse.
• High quality recordable CD-Rs / DVD-Rs
• One free PCI slot for DVD system or two free PCI slots for CD system (refer to
Appendix A).
• One external COM Port (COM1 or COM2) for the ScribeEC loader.
• *USB to Serial Converter can be used if COM port is not available.
• IEEE-1394 B Adapter (Included).
2-Drive & 4-Drive Models – Minimum System Requirements:
• Minimum Pentium® 4 or compatible personal computer @ 2 GHz or faster.
• Windows 2000 Professional (Service Pack 4 or higher) or Windows XP Professional
(Service Pack 1.0a or higher) with Administrative rights.
• 1GB RAM
• 7200 RPM ATA-100 hard drive with 850 MB for CD-R or 5GB (NTFS) for DVD-R
of free hard disk space - fully defragmented.
• Monitor: 800 x 600 display, 16-bit color recommended.
• Two button mouse.
• High quality recordable CD-Rs / DVD-Rs.
• One free PCI slot for DVD system or two free PCI slots for CD system (refer to
Appendix A).
• One external COM Port (COM1 or COM2) for the ScribeEC loader.
• *USB to Serial Converter can be used if COM port is not available.
• IEEE-1394 B Adapters (Included).