EC SCRIBE EC with OptiEC PRO PRINTER INSTALLATION GUIDE
22 ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer Document Revision: 2004/12/28 2004/12/07 SCRIBE EC with OptiEC PRO PRINTER INSTALLATION GUIDE Minimum System Requirements Print Station & 1-Drive Models – Minimum System Requirements: • • • • • • • • • • • Minimum Pentium® III or compatible personal computer @ 800 MHz or faster. Windows 2000 Professional (Service Pack 4 or higher) or Windows XP Professional (Service Pack 1.
ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer 333 Document Revision: 2004/12/28 2004/12/07 IF YOU PURCHASED A PRINT STATION – SKIP THIS PAGE Mounting the Firewire Adapter Card Note: The internal configuration of your computer may be different from the computer picture below DVD dive ScribeEC requires only one PCI firewire B controller card (IEEE-1394B). For additional information on making the firewire connection refer to Appendix A. 1. 2.
ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer 444 Document Revision: 2004/12/28 2004/12/07 Making the Connection 1 & 2 Drive Systems have one firewire B cable connection (IEEE-1934B). 4 Drive Systems have two firewire B cable connections (IEEE-1934B).
ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer 555 Document Revision: 2004/12/28 2004/12/07 Installing the SCRIBE EC Software 1. Insert the SCRIBE EC software CD. 2. From the CD ROM drive of the computer, click Install SCRIBE Software. (fig. 1) 3. Click Next (fig. 1). 4. Accept the license agreement and click Next (fig. 2). (fig. 2) 5. Click Install (fig. 3). (fig. 3) 6. Click Finish (fig. 4). (fig.
ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer 666 Document Revision: 2004/12/28 2004/12/07 Installing the SCRIBE EC Alignment Utility 1. Insert the SCRIBE CD into the CDROM drive of your PC. 2. Click on setup.exe of the alignment utility and Click Next (fig. 1). 3. Choose the setup type that best suits your needs, then click Next (fig. 2). 4. Click Install (fig. 3). 5. A progress bar will appear (fig. 4). (fig. 1) (fig. 2) 6.
ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer 777 Document Revision: 2004/12/28 2004/12/07 Installing the OptiEC PRO Printer Driver 1. Click Start-> Settings-> Printers 2. Click Add New Printer 3. The “Welcome to the Add Printer Wizard” window will appear (fig. 1). Click Next button. 4.
ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer 888 Document Revision: 2004/12/28 2004/12/07 Installing the OptiEC PRO Printer Driver (cont.) 7. 8. 9. 10. 11. 12. 13. After specifying location of a driver for the OptiEC PRO printer, the printer “CD/DVD Printer 6” will appear in the “Add Printer Window” (fig. 7). Click Next to continue.
ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer 999 Adjusting the OptiEC PRO Printer Driver Settings Printing Preferences To change the printing preferences for the OptiEC PRO printer, please do the following: 1. 2. 3. 4. 5.
1010 ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer Document Revision: 2004/12/28 2004/12/07 Aligning the Drive Tower 1. From your Start Menu Open the SCRIBE EC Alignment Utility (fig. 1). It will be located in the folder designated when you installed the alignment utility. Choose the appropriate COM Port which the Scribe EC Loader is installed on and Click Start Test. 2.
1111 ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer Document Revision: 2004/12/28 2004/12/07 Aligning the OptiEC PRO Printer Alert: Before starting the Alignment Utility, position the back end of the inkjet printer in line with the dotted line on the top of the drive bay. 1. From the Start Menu Open the SCRIBE EC Alignment Utility. It will be located in the folder designated when you installed the alignment utility.
ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer 121212 Document Revision: 2004/12/28 2004/12/07 Appendix A DVD8Z-9001EC, DVD8Z-9002EC 1 and 2 DVD drive system requires only one PCI firewire B controller card (IEEE1394B) to be installed in a host PC. One firewire B cable is connected between a host PC and a drive bay. DVD8Z-9004EC 4 DVD drive system requires only one PCI firewire B controller card (IEEE-1394B) to be installed in a host PC.
ScribeEC OptiEC PRO printer Scribe ECwith Quick Installation Guide Installation Guide with Prism PLUS Printer 131313 Document Revision: 2004/12/28 2004/12/07 Troubleshooting 1. The ScribeEC program did not recognized the loader. a. Check the power cable on the back of the ScribeEC loader. b. Make sure the power switch on the power supply of the loader is in ON position (the I is pressed in). c. Make sure the power switch on ScribeEC loader is turned ON. d.
