With SureThing Software Rev.
Installing the Prism Plus Printer Driver* 1. 2. 3. 4. 5. 6. Click Start-> Settings-> Printers Click Add New Printer The “Welcome to the Add Printer Wizard” window will appear (fig 1) . Click Next. In the “Local or Network Printer” window, uncheck the “Automatically detect installed printer” option , leaving the “Local printer attached to computer” option fi( g 2) and click Next.. In the “Select a Printer Port” window, leave the default as LPT1 (fig 3) and click Next.
Installing the Prism Plus Printer Driver (cont.) 7. After specifying the driver for the Prism Plus printer, the printer “Rimage Perfect Image Printer PF” will appear in the “Add Printer Window” (fig 7). Click Next to continue. 8. In the “Name your Printer” window, leave the printer as the default name, and select the printer to be the default printer (fig 8) and click Next. fig 7 9. In the “Printer Sharing” window, select “Do Not Share the Printer” (fig 9) and click Next. 10.
!DJUSTING THE 0RISM 0LUS 0RINTER $RIVER 3ETTINGS CONT $EVICE 3ETTINGS 'O TO 3TART 3ETTINGS 0RINTERS 2IGHT CLICK ON THE 2IMAGE 0ERFECT )MAGE 0RINTER 0& PRINTER IN THE 0RINTERS &OLDER 'O TO 0ROPERTIES 'O TO THE $EVICE 3ETTINGS 4AB &OR THE 3CRIBE 0ROGRAM TO USE THE PRINTER EFFECTIVELY PLEASE MATCH THE SETTINGS OF YOUR PRINTER DRIVER TO THE EXAMPLE ON THE RIGHT SIDE OF THIS PAGE 4O SAVE SETTINGS #LICK !PPLY AND /+ TO EXIT 8 DPI .
Installing SureThing Software * * When Prism Plus and Duplicator are purchased together, SureThing Software is pre-installed at the factory *2000 & 9000 Series Only 1. Place CD in Drive and run the SureThing Setup.exe file 2. Click the “I Accept” button on the license agreement (fig1) fig1 3. Click “Next” on the Welcome Screen (fig2) fig2 4.
Installing SureThing-Continued 5. Click “Next” on the Add to Desktop Menu (fig4) fig4 6. On the Ready to Install screen, click “Start” (fig5) fig5 7.
Important Notes Note: The maximum resolution for a .STD file is 600 dpi. If print image exceeds 600 dpi, a .PRN file must be used. Note: When submitting the PDF file to print, please make sure the target printer is NOT the Default printer. (For Example If printing to Prism -Prism cannot be the default printer) If needed, add a dummy Printer to the printers and faxes directory.
Creating an STD file 1. Open SureThing CD Label Software as shown in Fig. 1. 2. Add text and images to your label. 3.
________________________________________________ Note: For information on creating .PRN files, Please see your user manual. The user manual is located on the User Manual CD that came with your MF Digital Duplicator.
This Page Intentionally Left Blank
4HERMAL 0RISM 2IBBONS #$ $6$ 0RINTER 2IBBONS 4HE 'OLD 3TANDARD 4O /RDER 0RISM 2IBBONS OR )NKJET PRINTER SUPPLIES #ALL X WWW MFDIGITAL COM 0!24 #$0 02. "+ #$0 02. 2%$ #$0 02. ",5% #$0 02. '2. #$0 02. -5,4) $%3#2)04)/.
