EC SCRIBE EC with Prism PLUS PRINTER INSTALLATION GUIDE
22 Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide Document Revision: 2004/12/28 2004/12/07 Minimum System Requirements Print Station & 1-Drive Models – Minimum System Requirements: • • • • • • • • • • • Minimum Pentium® III or compatible personal computer @ 800 MHz or faster. Windows 2000 Professional (Service Pack 4 or higher) or Windows XP Professional (Service Pack 1.
Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide 333 Document Revision: 2004/12/28 2004/12/07 Mounting the Firewire Adapter Card Note: The internal configuration of your computer may be different from the computer picture below DVD dive ScribeEC requires only one PCI firewire B controller card (IEEE-1394B). For additional information on making the firewire installation refer to Appendix A. 1. 2. 3. 4. Shut down the PC. Turn the PC’s power off.
Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide 444 Document Revision: 2004/12/28 2004/12/07 Making the Connection * 1 & 2 Drive Systems require one firewire cable connection (IEEE-1934). * 4 Drive Systems require two firewire cable connections (IEEE-1934).
Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide 555 Document Revision: 2004/12/28 2004/12/07 Installing the SCRIBE EC Software 1. Insert the SCRIBE EC software CD. 2. From the CD ROM drive of the computer, click Install SCRIBE Software. (fig. 1) 3. Click Next (fig. 1). 4. Accept the license agreement and click Next (fig. 2). (fig. 2) 5. Click Install (fig. 3). (fig. 3) 6. Click Finish (fig. 4). (fig.
Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide 666 Document Revision: 2004/12/28 2004/12/07 Installing the SCRIBE EC Alignment Utility 1. Insert the SCRIBE CD into the CDROM drive of your PC. 2. Click on setup.exe of the alignment utility and Click Next (fig. 1). 3. Choose the setup type that best suits your needs, then click Next (fig. 2). 4. Click Install (fig. 3). 5. A progress bar will appear (fig. 4). (fig. 1) (fig. 2) 6.
Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide 777 Document Revision: 2004/12/28 2004/12/07 Installing the Prism Plus Printer Driver 1. 2. 3. 4. 5. 6. Click Start-> Settings-> Printers Click Add New Printer The “Welcome to the Add Printer Wizard” window will appear (fig. 1). Click Next.
88 Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide Document Revision: 2004/12/28 2004/12/07 Installing the Prism Plus Printer Driver (cont.) 7. After specifying the driver for the Prism Plus printer, the printer “Rimage Perfect Image Printer PF” will appear in the “Add Printer Window” (fig. 7). Click Next to continue. 8.
Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide 999 Adjusting the Prism Plus Printer Driver Settings Printing Preferences To change the printing preferences for the Prism Plus printer, please do the following: 1. 2. 3. 4. 5.
1010 Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide Document Revision: 2004/12/28 2004/12/07 Adjusting the Prism Plus Printer Driver Settings (cont.) Device Settings 7. 8. Go to Start-> Settings -> Printers Right-click on the Rimage Perfect Image Printer PF printer in the Printers Folder 9. Go to Properties 10. Go to the Device Settings Tab 11.
1111 Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide Document Revision: 2004/12/28 2004/12/07 Aligning the Drive Tower 1. From your Start Menu Open the SCRIBE EC Alignment Utility (fig. 1). It will be located in the folder designated when you installed the alignment utility. Choose the appropriate COM Port that the Scribe EC loader is connected to then Click Start Test. 2.
1212 Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide Document Revision: 2004/12/28 2004/12/07 Aligning the Prism PLUS Printer Alert: Before starting the Alignment Utility, position the back end of the inkjet printer in line with the dotted line on the top of the drive bay. 1. From the Start Menu Open the SCRIBE EC Alignment Utility. It will be located in the folder designated when you installed the alignment utility.
1313 Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide Document Revision: 2004/12/28 2004/12/07 Appendix A DVD8Z-9001EC, DVD8Z-9002EC 1 and 2 DVD drive system requires only one PCI firewire B controller card (IEEE1394B) to be installed in a host PC. One firewire B cable is connected between a host PC and a drive bay. DVD8Z-9004EC 4 DVD drive system requires only one PCI firewire B controller card (IEEE-1394B) to be installed in a host PC.
1414 Scribe EC Quick Installation Guide ScribeEC printer with with PrismPrism PLUSPLUS Printer Installation Guide Document Revision: 2004/12/28 2004/12/07 Troubleshooting 1. The ScribeEC program did not recognized the loader. a. Check the power cable on the back of the ScribeEC loader. b. Make sure the power switch in the power supply of the loader is in the ON position (the I is pressed in). c. Make sure the power switch on ScribeEC loader is turned ON. d.
