User manual

Main User Guide/ Starting a New Batch 101-5-01-000
Ripstation Lite Pro – User Manual Page 23 of 37
4.6.1 CODEC Settings
Ripstation Lite Pro ships with a number of standard CODEC options pre-configured.
However CODECs may be added or deleted and the settings for the MP3, WMA, AAC and
OGG CODECs may be modified.
• To add a new codec, click the [Add] button in the Start a New Batch dialog box.
The New Output dialog will appear as in figure 4.9.
Figure 4.9 – New Output Dialog Box
• Choose the CODEC you wish to add to the display from the drop down box at the
top and press [OK].
• If you would like to delete a CODEC from the display, select the CODEC to be
removed in the output formats section of the Start a New Batch dialog box
(highlighted by the blue bar) and press [Delete].
• To modify a CODEC’s settings, select the CODEC you wish to modify in the Start
a New Batch dialog box and click the [Edit] button. This will open a new dialog in
order to configure the CODEC settings including bit rates and VBR/CBR options.
For the MP3 CODEC, the box in figure 4.10 appears.