User manual

Quick Start Guide 101-5-01-000
Ripstation Lite Pro – User Manual Page 8 of 37
2.0 Step-by-step guide of Robotic Hardware - 7601XD
2.1.1 Step One – Remove the Packing Constraints
• Carefully remove the autoloader from its carton.
• Unlock cover with the key and install the plastic rods.
• Place the system on a level workspace free of debris, dust, humidity, excessive
heat, and electronic or electromagnetic interference.
• Remove protective plastic cover from system and save along with the rest of the
packaging.
2.1.2 Step Two – Plug in the Peripherals
Using the power cord, plug in the autoloader to a properly grounded AC receptacle. It is
highly recommended that a surge protector is used to ensure safety in operation. Then
connect a USB cable from the 7601XD to the PC.
2.1.3 Step Three - Installing the drivers
Then power on the unit using the main switch at the back of the autoloader and the
“Found New Hardware Wizard” will open.
Select install from a list or specific location and click next and the Search and
Installations window will open.