Manual

Spectrum2 Printer Operator’s Guide

Document Revision: 100102

• To set the Spectrum2 Printer as Default, select Yes (select No if another printer is

normally the default printer)

• Click Next

• When prompted to print test page, select No

• Click Finish

• Windows 98 requires re-starting computer to complete the installation process

Printer Driver Installation for Windows NT

In order to print labels on discs, the Spectrum2 printer needs to be connected to a

computer that has the Spectrum2 printer driver software installed. The printer driver

software controls the printer's functions and allows adjusting the print density (darkness

or lightness of label), and other printing characteristics. Typically, when printing a disc

label, the printer driver dialog box is displayed showing the name of the printer and

choices for selecting the number of copies and selecting printer properties. Listed below

are instructions for installing the Spectrum2 printer driver for Windows NT.

Printer driver installation for Windows NT:

• Place Spectrum2 CD-ROM disk into computer's CD-ROM drive

• Click Start button (found on Windows toolbar)

• Select Settings (a list will be displayed)

• Click on Printers

• Double Click Add Printer

• Select My Computer

• (If not selected, Click Next, Select LPT1: Click Next, Click Have Disk Button)

• Click Browse, click Cancel when A:\ is not accessible

• Select the CD-ROM Drive that has the Spectrum2 Software CD

• Double Click Drivers folder

• Double Click Spectrum2 folder

• Double Click WinNT folder

• Double Click Color folder

• Select PPNTC600.INF

• Click Open, then Click OK

• Select MediaFORM Spectrum2 Color

• Click Next

• At Printer Name Click Next