Manual

Spectrum2 Printer Operator’s Guide

Document Revision: 100102

Changing the CD Tray

Figure 9: Spectrum2 Tray Release Button location

To Remove CD Tray

• Remove top cover

• From the Printer’s front control panel: Press Tray button to extend tray

• Press Tray Release button (this is a small, metal, spring loaded button located near

Chassis Release Knob)

• Hold CD Tray with left hand and pull outward, while pressing Tray Release button

• CD Tray should disengage from printer

To Insert CD Tray

• Turn OFF Power, and remove top cover

• If there is a CD tray in printer, remove CD tray from printer (see above)

• Hold CD tray in front of printer, with circular disc end oriented outward

• Gently guide end of tray into printer

• Try to guide CD tray straight into printer

• Stop when CD tray is at least halfway into printer

• Power ON printer

• At Power ON printer will bring CD tray into printer at proper position

Tray Release Button

Chassis Lock Knob

Note: Tray Release Button is located inside printer case