Owner Manual
Table Of Contents
- Introduction
- Table of Contents
- Safety Precautions
- Features and Specifications
- Stove Installation
- Planning the Installation
- Stove Placement Requirements
- Standard Installation
- Corner Installation
- Chimney Requirements
- Chimney Connector Requirements
- Chimney Termination Requirements
- Special Installation: Exterior Factory-Built Chimney
- Special Installation: Masonry Chimney
- Special Installation: Masonry Fireplace
- Installing the Soapstone
- Connecting the Combustion Fan
- Connecting the Smart Sensors
- Initial Curing
- How Catalyst Works
- Catalyst Smart App
- Regular Maintenance and Troubleshooting
- Monthly Maintenance
- Annual Maintenance
- Catalytic Combustor Replacement
- Lifetime Limited Warranty
Catalyst Owner’s Manual | © MF Fire 2017 Page | 18
Special Installation: Masonry Fireplace
Catalyst may be used in conjunction with a masonry fireplace provided
all installation instructions are followed.
The entire fireplace must be clean, undamaged, and meet all local
building codes. This installation requires a full reline. The liner must be
stainless steel chimney connector or flexible vent pipe. Follow the liner
manufacturer’s instructions for installation and support.