Owner Manual
Table Of Contents
- Introduction
- Table of Contents
- Safety Precautions
- Features and Specifications
- Stove Installation
- Planning the Installation
- Stove Placement Requirements
- Standard Installation
- Corner Installation
- Chimney Requirements
- Chimney Connector Requirements
- Chimney Termination Requirements
- Special Installation: Exterior Factory-Built Chimney
- Special Installation: Masonry Chimney
- Special Installation: Masonry Fireplace
- Installing the Soapstone
- Connecting the Combustion Fan
- Connecting the Smart Sensors
- Initial Curing
- How Catalyst Works
- Catalyst Smart App
- Regular Maintenance and Troubleshooting
- Monthly Maintenance
- Annual Maintenance
- Catalytic Combustor Replacement
- Lifetime Limited Warranty
Catalyst Owner’s Manual | © MF Fire 2017 Page | 32
Setting the Temperature
Catalyst will automatically adjust to maintain
the perfect room temperature for you. This
temperature can be chosen by touching the
screen and sliding the temperature slider
circle pictured in the center of the app. If you
don’t do anything, Catalyst will automatically
work to achieve a perfect 70
o
F.
If your turn the dial all the way down Catalyst
will burn as slowly as possible. If you turn it
all the way up it will burn as quickly as
possible.
Controlling Your Blower
In addition to the buttons on the back of
Catalyst, you can control the blower from your Catalyst Smart App.
Slide the slider all the way to the left to turn the blower up, all the way
to the right to turn it off, or somewhere in the middle for your own
perfect airflow rate.
Monitor Stove Status
Check in on the status of your burn on the status screen. From the
main screen click the status tab. The status screen shows you the
current room temperature, fire temperature, burn rate, burn status,
efficiency, and even more!