Owner Manual

33 | Page Catalyst Owner’s Manual | © MF Fire 2017
Note: No status screen numbers will display if there is no fire or the fire
is too small in Catalyst.
Notifications
Catalyst will notify you when you of a few events during your fire.
“Five Minute Start-Up” – When you start your Catalyst the
combustion goes into high mode to rapidly deliver air to your fire.
“Boost Mode Activated” – If your fire is dying Catalyst will go into
boost mode, speeding up your combustion fan to deliver essential air
to the fire. Boost mode is commonly occurs after start-up at the
beginning of a cold burn or as the wood runs out and your fire dies.
“Over Fire Detected” – Over firing occurs when a fire in the wood
stove grows too hot. This overheating can cause damage to your wood
stove and even cause chimney fires. If your stove begins to over fire,
Catalyst will automatically shut down airflow to prevent damage. Do
not open the stove door during over fire.
Temperatures: View your
current room and fire
temperatures.
Burn Rate: See how much
heat your stove is currently
producing
Burn Status: Check to see if
you are burning well or if it is
time to add more wood.
Efficiency: Monitor your
smart efficiency to see how
much money you are saving.