Owner Manual

Catalyst Owner’s Manual | © MF Fire 2017 Page | 38
Catalytic Combustor Replacement
If you suspect that your catalytic combustor is not working, the catalytic
combustor should be removed an inspected to identify the source of
the problem.
CAUTION: DO NOT OPERATE THE CATALYST WOOD
HEATER WITH CATALYTIC COMBUSTOR REMOVED!
To access the catalytic combustor, first remove the back panel of the
stove, then remove the catalytic combustor panel. The catalytic
combustor (orange) may then be lifted up and removed from its ring
holder. If any cracking or peeling is observed, the catalytic combustor
must be immediately replaced. Please contact MF Fire for a
replacement catalytic combustor.
To replace the catalytic combustor, simply insert the new catalytic
combustor inside the ring holder pictured. Replace and tightly secure
the catalytic combustor panel and the back panel before operating the
heater again.
Safety Notice: Burn untreated wood only. Burning materials
such as treated wood, metal foil, coal, plastic, garbage,
Sulphur, or oil may damage the catalytic combustor.
Excessive smoking indicated the combustor has failed and
requires replacement.
Back
Panel
Catalytic
Combustor
Panel