User's Manual Part 2
Fig. G
Attach Scooter Samantha to her Motor Scooter
securely
SAFE BATTERY USAGE
1. Batteries should be replaced by an adult.
2. Non-rechargeable batteries are not to be charged.
3. Only batteries of the same equivalent type as recommended are to be used.
4. Batteries are to be inserted with the correct polarity.
5. Rechargeable batteries are to be removed from the toy before being charged.
6. Exhausted batteries are to be removed from the toy.
7. Different types of batteries or new and used batteries are not to be mixed.
8. The supply terminals are not to be short-circuited.
9. Rechargeable batteries are only to be charged under adult supervision.
10.Do not dispose of batteries in fire; batteries may expolde or leak.
11. Use alkaline batteries for best performance and longer life.
QUICK START
TO PLAY WITH SCOOTER SAMANTHA
1. Place Scooter Samantha securely on her Scooter by attaching her hands to the handlebars
and her legs to the pegs on the base of Motor Scooter. (see Fig.G)
2. Slide the On/Off switch on the bike to the "ON" position.
3. Slide the On/Off switch on the R/C controller to the "ON" position.
4. To move the Scooter forward and play the stand feature, push and hold the seat on the
remote control to the forward position. (see Fig.H)
5. To move the Scooter backward, pull and hold the seat on the remote control to the
backward position. (see Fig.H)
6. To make her do awesome 360° spinning, press and hold the button on the top of seat of the
remote control (see Fig. H)
7. To move the Scooter to the left or right, switch and hold the seat on the remote control to
the left forward or right forward position. Scooter Samantha's arm turn the handle of her
Scooter right and left, depending on what direction you direct her Scooter via the remote
control. (see Fig.H)
Remember that Scooter Samantha is a fully articulated doll that can be
removed from her scooter for extended play.
Fig. H
You control the seat in different directions
where Samantha rides by remote control
Motor Scooter Samantha's remote control/scooter is available in 2 different
versions based on radio frequency (27MHz and 49MHz, indicated on the bottom of
bike and Remote Control) enabling you to race the dolls against each other for
added fun!
Please do not step or attempt to ride Samantha's Scooter. It is a toy, not an
actual Motor Scooter.
To avoid malfunctioning, do not play with two scooters that share the same
frequency at the same time.
Note: 1. Doll's head depicted on packaging for photography purposes only.
2. MotorScooter Samantha is not recommended for use on slippery surfaces, carpets or
loose gravel.
OPERATION TIPS
1. If Samantha's Scooter is responding slowly or malfunctioning, replace the "AA" batteries on
the bottom of bike and/or the 9V battery in the remote control. NOTE: If the Scooter does
not respond at all, please make sure that the remote control and Scooter share the same
radio frequency by checking the bottom of both units for matching "MHz" specifications.
2. Optimum operating range is up to 30 feet indoors. However, this may vary depending on
environmental conditions and/or radio interference.
3. Operation performance may be affected by surrounding buildings, structure or equipment.
4. Should this product cause local electrical interference, we recommend moving it away from
other electrical equipment.
CAUTION: Modifications not authorized by manufacturer may void users authority to
operate this device.
Note: This equipment has been tested and found to comply with limits for a Class B
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may
cause harmful interference to radio communications. However, these is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
OPERATION TIPS
2
3