Specifications
Power-Zone
®
4
General and Application Information
15
11/2005
© 2005 Schneider Electric All Rights Reserved
ENCLOSURES
NEMA Type 1 Indoor Enclosures
The standard Power-Zone 4 switchgear enclosure is NEMA Type 1, general purpose. NEMA Type 1
enclosures are dead front, metal-enclosed structures. All sheet steel parts of the enclosure, inside and
out, are painted using an electro-deposition process.
Figure 4: POWER ZONE 4 Switchgear, NEMA Type 1, Indoor Enclosure
Standard Features:
• Secondary wiring areas
• Removable, steel top plates over conduit entrance
• Hinged front doors with latches
• Circuit breaker or instrument compartment
• Bus compartment
• Cable compartment
• Capability for future expansion
• Two-piece removable side and back plates
• 1 1/2-inch-high base channels
• Electro-deposition paint process on structural parts
• ANSI #49 paint color
• Customer nameplates for each compartment
• White instrument mounting pans
Available Options:
• Vertical bus barriers
• Strip heaters in circuit breaker, bus,
and cable compartments
• Overhead circuit breaker lifting device
or floor crane
• Gasketing around doors and between
sections
• Filtering of doors and vents
• Lockable, hinged rear doors
• Lockable, hinged front doors
• 18-inch-high pull box
• Bottom plates
• Rodent barriers