Network Card User Manual
Table Of Contents
- MGE Network Solution
- Installation and Configuration
- Supervision / Administration via a Web browser
- Servers protection
- Set-up of the shutdown parameters
- The different server and UPS shutdown sequences
- Configuring a set of cards with Mupgrade
- Configuration in local mode and via Telnet or SSH
- Maintenance
- Appendices
www.mgeups.com
Network
Management Cards
User Manual
THE UNINTERRUPTIBLE POWER PROVIDER
Network Management Card
– User Manual 34003676EN/GA
Page
12/69
3.2 UPS
3.2.1 “UPS properties” page
Z This page gives instant access to the essential information about your UPS.
This page is automatically refreshed every 10 seconds (by default).
To change this value, go to the “System” page.
3.2.1.1 UPS zone: general information on the UPS.
Indication of the picture and generic name of the UPS range
Computer room: Customised name of your system corresponding to the “upsIdentName” object of the UPS
MIB (RFC 1628)
You can change this name on the “System” page.
3.2.1.2 “UPS status” zone: essential information
Z The various icons showing the status of the UPS are:
•
• Normal operation
•
• Alarm present. This icon links directly to
the alarm page