11RT

3.3.1 UPS personalization through external software

Insert the Solution-Pac 2 CD ROM in your CD drive.

◗ At the first Navigator Screen, select "Installation" and follow the instructions to install

Solution-Pac 2 for Windows.

◗ If nothing appears, launch startup.exe

◗ Then go to "Advanced settings" and "UPS settings".

Please note that the Linux/Unix/MacOS versions of Personal Solution-Pac do not include this feature.

3.3.2 Final Startup sequence

Press the <ON> button more than 3 seconds.

◗ After UPS internal test sequence, the green LED goes on.

CAUTION During the startup, if the Bypass AC source is out of

tolerance, there will be a 10msec output interrupt.

EX 5/7/11RT Systems

Operation3 — 6 86-86000-00 B00