Instruction manual

45
Figure 25: Point Configuration Interface
The list on the left displays the point number, name and current value for each
available point. Clicking on one of these locations will load the point’s current
configuration into the point box on the right, where the configuration may be
edited.
Each point contains the following common configuration attributes, which are
available in the top portion of the point box:
• Name
: This is a user description of the point, up to 16 characters.
• Timeout En
: Checking this box will allow the point to participate in timeout
processing when a port network timeout event is detected.
• Timeout Value
: This determines the value this point will default to upon the
occurrence of a network timeout. If a “Source Port” has been designated
(see below), then this value will also propagate to the configured remote
device connected to the designated port.