Instruction manual
Table Of Contents
- SAFETY INSTRUCTIONS
- CONTENTS
- CHAPTER 1 OUTLINE
- CHAPTER 2 INSTALLATION AND WIRING
- CHAPTER 3 OPERATION/CONTROL
- CHAPTER 4 PARAMETERS
- CHAPTER 5 PROTECTIVE FUNCTIONS
- 5.1 Errors (Alarms)
- 5.2 Troubleshooting
- 5.2.1 Motor remains stopped.
- 5.2.2 Motor rotates in opposite direction.
- 5.2.3 Speed greatly differs from the setting.
- 5.2.4 Acceleration/deceleration is not smooth.
- 5.2.5 Motor current is large.
- 5.2.6 Speed does not increase.
- 5.2.7 Speed varies during operation.
- 5.2.8 Operation mode is not changed properly.
- 5.2.9 Operation panel (FR-DU04) display is not provided.
- 5.2.10 POWER lamp is not lit.
- 5.2.11Parameter write cannot be performed
- 5.3 Precautions for Maintenance and Inspection
- CHAPTER 6 SPECIFICATIONS
- CHAPTER 7 OPTIONS
- APPENDICES
- REVISIONS
SPECIFICATIONS
196
6.1.3 Outline drawings
z
zz
z
M4500-001 to 010
220 (8.66)
260 (10.24)
170 (6.69)
211 (8.31)
195 (7.68)
6 (0.24)
245 (9.65)
10.5 (0.41)
86.5 (3.41)
2-
φ
6 hole
(Unit: mm (inches))
z
zz
z
M4500-025, 040
250 (9.84)
400 (15.75)
190 (7.48)
242 (9.53)
230 (9.06)
380 (14.96)
101.5 (4.00)
10.5 (0.4)
10 (0.39)
2-
φ
10 hole
(Unit: mm (inches))
6