Instruction manual
Table Of Contents
- SAFETY INSTRUCTIONS
- CONTENTS
- CHAPTER 1 OUTLINE
- CHAPTER 2 INSTALLATION AND WIRING
- CHAPTER 3 OPERATION/CONTROL
- CHAPTER 4 PARAMETERS
- CHAPTER 5 PROTECTIVE FUNCTIONS
- 5.1 Errors (Alarms)
- 5.2 Troubleshooting
- 5.2.1 Motor remains stopped.
- 5.2.2 Motor rotates in opposite direction.
- 5.2.3 Speed greatly differs from the setting.
- 5.2.4 Acceleration/deceleration is not smooth.
- 5.2.5 Motor current is large.
- 5.2.6 Speed does not increase.
- 5.2.7 Speed varies during operation.
- 5.2.8 Operation mode is not changed properly.
- 5.2.9 Operation panel (FR-DU04) display is not provided.
- 5.2.10 POWER lamp is not lit.
- 5.2.11Parameter write cannot be performed
- 5.3 Precautions for Maintenance and Inspection
- CHAPTER 6 SPECIFICATIONS
- CHAPTER 7 OPTIONS
- APPENDICES
- REVISIONS
INSTALLATION AND WIRING
15
(
2
)
Terminal block layout
In the main circuit of the inverter, the terminals are arranged as shown below:
M4500-001 to 010
UVW
P1 PR PX
s
crew size (M5)
Screw size (M4)
Charge lamp
Screw size (M4)
Jumpers
RST
NP
RS
R1 S1
M4500-060, 100
SR
UVW
P1
Jumper
Screw size (M4)
Screw size (M8
)
Screw size (M8)
Charge lamp
T
RS
R1 S1
NP
M4500-025, 040
S
UVW
P1
Jumper
Screw size (M4)
Charge lamp
Screw size (M6)
Screw size (M6)
RT
RS
R1 S1
NP
Note: 010 does not have the jumper across the terminals PR-PX.