Installation Guide

Install battens of split bamboo caps over the 2" x 2" cedar wood stringers as
shown on the right. Make sure you pre-drill pilot holes on the bamboo caps, then
use the 1 1/4" drywall screws to attach the split bamboo to the stringers. Make
sure not to drive the screws in too far, or the bamboo may crack.
You can also use round whole bamboo poles as the stringers instead of cedar
stringers, but make sure you pre-drill the holes before you secure them to the
posts.
We recommend whenever possible to use the cedar wood posts, stringers or whatever wood materials
you may use besides bamboos, reeds or other verticals used in the rolled fences.