Installation Guide

Installation for Trellis Panels
These panels can be installed using garden stakes, rebar, or whatever material you prefer to use.
These panels can also be installed on a wall.
To install using stakes etc:
Install the stakes into the ground using either your hands to push them in, or a mallet etc if the ground is
exceptionally hard. Place the stakes the same width as the trellis apart. Then, place the trellis in front of
the stakes, and use galvanized wire, zip ties or twine to attach the trellis to the stakes.
To install on a wall:
You will be hanging the trellis on nails or screws. Decide where you want the trellis to go. Then mark
where you would like to place the nails, and place the nails, after setting the trellis aside. Then, hang the
trellis on the nails, and if you like, affix the trellis to the nails using galvanized wire, twine or zip ties.
Easy installation: You can also just lean the trellis up against a wall or other structure if you do not want
to secure it.