User manual

15
When the battery is low, the Meter will show a warning
signal. When this display appears, it is time to replace
a new battery. When the low battery warning signal
is shown, the Meter will provide accurate results for
approximately 50 more measurements.
1. From the back of the Meter, gently lift the battery cover.
2. Insert a 3-Volt Lithium battery (CR-2032) with the “+” side facing up.
3. Close battery cover.
Installing/Replacing the Battery
How to Replace the Battery
1 2 3
BLOOD GLUCOSE METER
Easy•Touch
®
For In Vitro Diagnostic Use Only
Made in Taiwan to Specs of
MHC Medical Products, LLC
8695 Seward Road
Faireld, OH 45011
Toll #: 877.358.4342
DH-083011.5 • Rev. date: 09/2011
BLOOD GLUCOSE METER
Easy•Touch
®
For In Vitro Diagnostic Use Only
Made in Taiwan to Specs of
MHC Medical Products, LLC
8695 Seward Road
Faireld, OH 45011
Toll #: 877.358.4342
DH-083011.5 • Rev. date: 09/2011
BLOOD GLUCOSE METER
Easy•Touch
®
For In Vitro Diagnostic Use Only
Made in Taiwan to Specs of
MHC Medical Products, LLC
8695 Seward Road
Faireld, OH 45011
Toll #: 877.358.4342
DH-083011.5 • Rev. date: 09/2011
BLOOD GLUCOSE METER
Easy•Touch
®
For In Vitro Diagnostic Use Only
Made in Taiwan to Specs of
MHC Medical Products, LLC
8695 Seward Road
Faireld, OH 45011
Toll #: 877.358.4342
DH-083011.5 • Rev. date: 09/2011