User manual

Setting Up the Meter

Setting Up the Date & Time

To turn the Meter on, rst insert a battery, then press the reset button located

at the back of the Meter and proceed with the following instructions.

1. Press the M button to enter this mode.

Press and release S button to choose “24hr”

or “12hr” display. With your preferred clock

mode, press M button and the year setting

will appear. Press and release the S button

until the correct year appears. (Fig.1)

2. To set the year and move on to choose the

month, press the M button. To change the

month, press the S button. (Fig.2)

3. To set the month and move on to choose the

day, press the M button. To change the day,

press the S button. (Fig.3)

(Fig.1)

(Fig.2)

(Fig.3)