User manual

23
5. Discard the rst drop of Control Solution and squeeze a
small drop of Control Solution on a clean nonabsorbent
surface (such as a clean piece of wax paper). Do not apply
Control Solution to the Test Strip directly from the bottle.
6. Bring the tip of the Test Strip to lightly touch the drop of
Control Solution. Control Solution is automatically pulled
into the strip through the tip. Hold until the meter beeps.
The meter will now begin counting down from 5 to 1 and
the Control Solution test result will appear.
Caution:
Please remember that in order to prevent contamination, follow
the above instructions for performing the Control Solution test.