User manual

Obtaining a Blood Sample

SAMPLE MAY BE OBTAINED FROM FINGER, PALM or FOREARM

For further instructions please see the insert provided with lancing device.

1. Unscrew and remove the endcap of the lancing device.

2. Insert the lancet into the lancet holder.

3. Twist and remove the protective lancet cover to expose the sterile

needle tip.

4. Recapping and screwing the endcap to the body of the lancing device.

5. Pull back on the cocking mechanism until it comes to a stop.

6. Place the lancing device rmly against the nger tip and press the release

button.

7. After sampling, remove the endcap containing the used lancet carefully.

8. Remove the lancet from the lancing device. Discard the used lancet

properly in accordance with local, state, and federal law.