User manual

33
Transfer Test Results to a Computer
With the EasyTouch
®
Glucose Monitoring System, it is easy to transfer test
results to your personal computer. Follow these simple instructions:
1. Obtain the required software and USB cable
For order information please call Customer Service at 1.877.358.4342
2. Install the software on your computer
Installation instructions will be provided with the software.
3. Get ready to transfer test results
Connect the interface cable to a serial port on your computer. Then
connect the other end of interface cable to the data port located on
the side of the meter with the meter turned off. “PC” will appear on
the display, indicating that the meter is in the communication mode.
4. Transfer data
Follow the instructions provided in the software to download the results
from the meter. After nishing the data transfer, press M button to turn
off the meter.
Note: While in the communication mode, you will be unable to perform
a blood glucose test. If the meter is not in the PC link mode, it will not
respond to computer commands.