Owner`s manual

Mounting
Grill Head Assembly
1. Attach the grill lid to the grill head bottom using the two
Hinge Pins and Hinge Clips. (Fig. 16)
1. Attach the handle to the grill lid using two ¼ - 20 x 1 ½" Hex bolts
with Kep nuts. Graphite Gaskets are positioned between the end caps
and grill lid as shown in Fig. 17. Use two 7/16" wrenches, one to hold
the bolt head and one to tighten the nut.
1. Place the one piece Briquette Grate on the shelf edge just above the
burner.
2. Carefully place the Porcelain Briquettes on the grate in the pattern
shown. Use only one layer.
3. Place the two Cooking Grids above the Briquette Grate.
Before using your grill, leak test all gas line connections.
And follow the lighting instructions. See page 14.
Porcelain
Rock
11
Attaching the Grill Lid
Connect the Handle
Grates, Briquettes and Cooking Grids (Fig. 18)
Grates, Briquettes and Cooking Grids cont.
Warming Rack
Rest the warming rack on the cooking grid
at the rear of the fire pit.
Install the thermometer through the hole in the
center of the lid. Snug fit the thermometer to
the lid using the thumb bolt. Do not over
tighten
Thermometer
Fig. 16
Fig. 17
Fig. 18