Operating instructions
12
"MOJO" Series Unvented Gas Log Sets
IMPORTANT: Hold heater valve firmly with a wrench to
prevent movement when connecting to inlet pipe.
A qualified gas appliance installer must connect
the heater to the gas supply. Consult all local codes.
Figure 14
FP2007
gas connection
FP2007
Pipe Coupling
To Heater
Valve
Gas Supply Inlet
Manual Shutoff
Valve
Pipe
Stainless
Flexible Tube
Figure 14 -
Gas Connection
Locations that the Pressure Tapping Point
May Be Installed
, to reduce the supply tank pressure to a maximum of
13" w.c. This is in addition to the internal regulator in the
heater valve.