Operating instructions


17
"MOJO" Series Unvented Gas Log Sets
LG553
MJ127 log 8
10/08
Log #8
LG553
Figure 20
1. Place log #8 on right bracket next to
valve by sliding grooves on sides of
log into cutout on brackets. 

LG554
MJ127 log 1
10/08
Log #1
LG554
Figure 21
2. Place log #1 by setting the log over
the rear bracket over the two pins.

LG555
MJ127 Log #2
10/08
Log #2
LG555
Figure 22
3. Place log #2 at an angle across the
burner by setting the log over the
two pins located on top of the burner.

4. Place log #3 at an angle over log #2 toward
the back by matching the rectangular notch
on the bottom of this log with the rectangular
protrusion on log #2. Set the notch located on
the bottom of this log toward the back over the
metal bracket located to the right side of the
burner. 
LG545
MLDV log 3
Figure 23
Log #3
LG545
