Operating instructions


18
"MOJO" Series Unvented Gas Log Sets
LG546
MLDV log #4
Log #4
LG546
Figure 24
5. Place Log #4 by matching the rectangu-
lar protrusion on the bottom of this log
over the rectangular notch on log #3.
Swing the log slightly to the front and
set the log over the notch located on the
upper surface of log #3. 
LG547
MLDV log #5
Log #5
LG547
Figure 25
6. Place log #5 by matching the rectangular notch
on the bottom of the log with the rectangular
protrusion on log #2. Set the notch on the bottom
of this log over the very far left tong on the grate.

LG548
MLDV log 6
Log #6
Figure 26
LG548
7. Place log #6 at an angle over log
#5 toward the back by matching the
rectangular notch on the bottom of this
log with the rectangular protrusion on
log #5. Set the notch located on the
bottom of this log toward the back over
the metal bracket located to the left
side of the burner. 
